Thank you!
We will contact you in the near future
━ THE CARBONIZATION FURNACE
BOSA 6-150
The BOSA 6-150 FL carbonization furnace is a retort-type plant with frontal loading and unloading of removable retorts.
The furnace has an automatic control system that controls the temperature in the furnace by controlling the corresponding flaps, the rotations of the exhaust funs and the emergency chimney cover.
The furnace consists of six separate identical pyrolysis reactor housings. Each reactor body has its own "door", through which a retort with raw materials is installed in the reactor with the help of a forklift.
The removable retort also serves as a container in which the coal is cooled. Thanks to this, there is no need for additional cooling tanks, which significantly saves the budget and reduces the human resources required for the operation and maintenance of the furnace. After cooling, the coal is poured out of the retort and the retort is again loaded with raw materials for further installation in the reactor.
Six pyrolysis housings — reactors are connected into one housing and form a single furnace space, which significantly reduces heat losses. The furnace serves as a coolant generator for all six retorts.
The retorts are loaded into the reactor with a shift in time, to evenly ensure the continuous operation of the furnace and maintain a constant temperature inside the reactors.
To ensure the operation of the furnace on raw materials with a high percentage of moisture, the furnace is equipped with six pre-drying units.
Pre-drying works at the expense of flue gases exhausted in the furnace, which allows you to save on wood drying, reduce the time for wood preparation, and obtain better quality coal in a shorter time and spend fewer resources on raw material preparation.
Or write to us
SPECIFICATIONS
━ PARAMETERS
ADVANTAGES OF THE BOSA 6-150 FURNACE
Closed production cycle
The process of pre-drying of raw materials, pyrolysis, cooling of coal and its stabilization take place in one container — a removable retort.
Environmental friendlinessof the equipment
Combustion of all products of thermal decomposition of wood in a single furnace space! This furnace ensures not only the production of the necessary energy, but also the environmental friendliness of the equipment.
Energy efficiency
Use of pyrolysis energy for conducting the technological process and drying wood.
Long service life
All furnaces have stationary reactors made of stainless steel, which provide heating of removable retorts without direct contact with the coolant flow.
Optimizationof work processes
The use of exhaust gases in the furnace for pre-drying of firewood, which makes it possible to reduce the moisture of wood, thereby increasing the productivity of the furnace.
Uniform operationof the furnace
Pyrolysis reactors work according to the principle of a shift in time from the start of operation of each reactor. As a result, a constant temperature is maintained in the furnace and overheating does not occur.
Control automation
Control over the operation of the furnace is carried out by an automatic system that can be placed in a place convenient for the staff and monitor the operation of the furnace remotely.
Reductionof time full cycle
Forced acceleration of coal stabilization in retorts after cooling. As a result, the full cycle of coal production is reduced several times.
WATCH VIDEO
Get a consultationfrom our specialist
We’ll tell you more about our equipment and answer your questions and send you our price
Leave the requestfor consultation